In case of using such a high viscosity Fuel Oil, the Fuel Oil Storage Tank should always be heated up for keeping suitable oil viscosity to be transferring the oil by pump.
Therefore, so much cost are required for setting up those heating devices to be placed in each section of the Fuel Oil Storage Tank and their maintenance cost.
To solve such a problem above, our company has developed EH type Eco-Heater.
Eco-Heater is consisted of using heated oil in the 2 kind of Fuel Oil tank which are separately arranged on the middle deck in the engine room.
With flowing down this heated oil to the Fuel Oil Storage Tank, in which the oil to be transferred is mixed and decreased its viscosity to the degree that can be easily transferred to the Fuel Oil Tank for making up
By using the above system, conventional such as steam heating devices can be eliminated in the most parts and saving initial costs of the facility can be resulted too.
And furthermore, to decreasing their maintenance costs(or running cost) for the steam piping.
Delivery results has recorded about 120 units supplied. (Until 2012/Oct)
Heater to be lowering oil viscosity required of Fuel Oil transfer pump taking suction from the fuel oil Storage Tank and that is of the heater resulting such heating capacity to minimum extent..
Furthermore, in response to the user needs, applying an Inverter type flow control
Device to the Eco. Heat pump, resulting more reducing total expenses in this Eco heating system.
*This specifications may be subject to change without any notice